Subaru FORESTER 2012 - Screensaver (Type E Audio)

Black plate (235,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
. “SELECT PHONE” to connect the
selected cell phone
. “CHANGE NAME” to change the voice
tag
. “DELETE” to delete the selected cell
phone from the list
. “GO BACK” to go back to the “PHONE
SETUP” mode
! Setting passkey
S05BE060205
1. Select the “SET PASSKEY” menu.
After the currently set passkey is dis-
played, a new passkey can be entered.
2. Input the new passkey by performing
either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the passkey.
3. Select the “CONFIRM” menu. The new
passkey is displayed, the passkey is
changed and the mode changes to the
“PHONE SETUP” mode.
! Deleting registered cell phone from
the list
S05BE060206
1. Select the “DELETE” menu.
2. Select a cell phone to be deleted by
performing either of the following proce-
dures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
voice tag.
3. Select the “CONFIRM” menu. “DE-
LETED” is displayed, the data is deleted
and the mode changes to the “PHONE
SETUP” mode.
! System setup
S05BE0603
After selecting the “SYSTEM SETUP”
menu, perform the following procedures.
You can select the following menus only
by operating the “TUNE/TRACK” dial.
! Setting guidance volume
S05BE060301
To set the guidance volume, perform the
following procedure.
1. Select the “GUIDANCE VOL”/“GUI-
DANCE VOLUME” menu.
2. Set the guidance volume by operating
the “TUNE/TRACK” dial.
! Initializing the registered data
S05BE060302
To initialize the registered data, perform
the following procedure.
1. Select the “INITIALIZE” menu.
2. Select the “CONFIRM” menu. First
“PLEASE WAIT”, then “INITIALIZED” is
displayed. The registered data is initia-
lized and the mode changes to the last
mode.
Screensaver (type E audio)
S05BK
If the following operations are not per-
formed for more than 30 seconds while
the audio is ON, the screensaver will be
displayed.
. Operate any button or dial
. Shift the shift lever/select lever to the
“R” position
. A cell phone registered in the Hands-
free system is called
If one of the following operations is
performed, the screensaver turns off and
the operation screen will be displayed.
. A cell phone registered in the Hands-
free system is called
If one of the following operations is
performed, the screensaver turns off.
However, the operation screen will not
be displayed.
. Operate any button or any dial in a
condition other than the following condi-
tions
– Pressing the
button while a
mode other than the CD mode is
selected
– Pressing the volume control buttons
of the audio control buttons
– Pressing the power switch
. Insert a CD (except reloading a CD)
Audio 5-49
– CONTINUED –
5