Subaru FORESTER 2012 - Page 226

Black plate (234,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
5-48 Audio
– Press the talk switch and say
the number.
3. Select the “CONFIRM” menu. If the
inputted PIN code is correct, “LOCKED” is
displayed and the phonebook is locked.
NOTE
While the phonebook is locked, if the
operation restricted menu is selected,
“PHBK LOCK” is displayed.
! Unlocking the phonebook
S05BE060103
1. Select the “PHBK UNLOCK”/“PHONE-
BOOK UNLOCK” menu. Then “CUR-
RENT PIN?” is displayed.
NOTE
If the phonebook is not locked, “UN-
LOCK” is displayed and the mode
changes to the security mode.
2. Input the PIN code by perfo rming
either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the number.
3. Select the “CONFIRM” menu. If the
inputted PIN code is corre ct, “ UN-
LOCKED” is displayed and the phone-
book is unlocked.
! Phone setup
S05BE0602
After selecting the “PHONE SETUP”
menu, perform the following procedures.
! Setting pair phone
S05BE060201
Refer to “s05be0502Preparation for using the
Hands-free system” F5-41.
! Selecting phone
S05BE060202
To select the registered cell phone for
connecting to the in-vehicle equipment,
perform the following procedure.
1. Select the “SELECT PHONE” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by performing
either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the voice tag.
3. Select the “CONFIRM” menu (only
after saying the voice tag). “SELECTED”
is displayed, the selected cell phone is
connected to the in-vehicle equipment and
the mode changes to the “PHONE SET-
UP” mode.
! Changing the voice tag of the cell
phone
S05BE060203
1. Select the “CHANGE NAME” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Select the cell phone by performing
either of the following procedures.
– Operate the “TUNE/TRACK” dial.
– Press the talk switch
and say
the voice tag.
3. Register the voice tag. For details,
refer to “
s05be0502Preparation for using the
Hands-free system” F5-41.
! List phones function
S05BE060204
The cell phone voice tags saved in the cell
phone list are spoken by using the list
phones function.
1. Select the “LIST PHONES” menu. If
no cell phones are registered, “EMPTY” is
displayed and the mode changes to the
“PHONE SETUP” mode.
2. Registered cell phones are displayed
on the saved side. While displayed, if the
“TUNE/TRACK” dial is turned, the next
registered cell phone is displayed. Press
the ON hook button
to close the
Hands-free menu.
3. Select a cell phone by operating the
“TUNE/TRACK” dial or pressing the talk
switch
. Then “SELECTED” is dis-
played.
4. Select the following menus.