Black plate (113,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
! Locking the passengers’ windows
S02AH0405
1) Lock
2) Unlock
Push t he lock switch. When the lock
switch is in the lock position, the passen-
gers’ windows cannot be opened or
closed.
Push the switch again to cancel the
passengers’ window locking.
& Power window operation by
passengers
S02AH05
Each passenger window can be controlled
by the power window switch located on
the door.
To open:
Push the switch down and hold it until the
window reaches the desired position.
To close:
Pull the switch up and hold it until the
window reaches the desired position.
When the lock switch on the power
window switch cluster, located on the
driver’s side door, is in the lock position,
the passengers’ windows cannot be oper-
ated with the passengers’ switches.
& Initialization of power win-
dow
S02AH06
If the vehicle’s battery is disconnected due
to situations such as battery or fuse
replacement, the following functions are
deactivated.
. One-touch auto up/down function
. Anti-entrapment function
Initialize the power window using the
following procedure to reactivate these
functions.
1. Close the driver’s door.
2. Turn the ignition switch to the “ON”
position.
3. Open the driver’s side window halfway
by pushing down the power window
switch.
4. Pull up the power window switch and
close the window completely. Continue
pulling up the switch for approximately 1
second after the window is closed com-
pletely.
Keys and doors 2-25
2
To Next Page
Loading...
