Black plate (157,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
Turn signal lever
S03AI
To activate the right turn signal, push the
turn signal lever up. To activate the left
turn signal, push the turn signal lever
down. When the turn is finished, the lever
will return automatically. If the lever does
not return after cornering, return the lever
to the neutral position by hand.
To signal a lane change, push the turn
signal lever up or down slightly and hold it
during the lane change. The turn signal
indicator lights will flash in the direction of
the turn or lane change. The lever will
return automatically to the neutral position
when you release it.
NOTE
For a vehicle that has the turn signal
lever equipped on the right side of the
steering wheel, the pushing direction
of the turn signal lever is opposite of
that described here.
Illumination brightness con-
trol
S03AJ
The brightness of clock display, audio, air
conditioner, information display and instru-
ment panel illumination dims automatically
when the light switch is in the “
” or
“
” position.
In addition, you can adjust brightness of
the instrument panel illumination for better
visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
When the control dial is turned fully
upward, the il luminati on brightne ss
becomes the maximum and the auto-
Instruments and controls 3-39
– CONTINUED –
3
To Next Page
Loading...
