EasyManua.ls Logo

Subaru FORESTER 2012 - Engine Coolant

Subaru FORESTER 2012
445 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (371,1)
Model "A8170GE-A" EDITED: 2011/ 7/ 6
equipped). Refer to s03ae48Coolant tempera-
ture low indicator light/Coolant tempera-
ture high warning light F3-18.
Check the fuse and replace it if necessary.
If the fuse is not blown, we recommend
that you have the cooling system checked
by your SUBARU dealer. Refer to
s11bbFuses F11-53 and s12ab02Fuse panel
located in the engine compartment F12-
16.
If frequent addition of coolant is neces-
sary, there may be a leak in the engine
cooling system. It is recommended that
the cooling system and connections be
checked for leaks, damage, or looseness.
& Engine coolant
S11AF02
WARNING
Never attempt to remove the radia-
tor cap/coolant filler tank cap until
the engine has been shut off and
has cooled down completely. Be-
cause the coolant is under pressure,
you may suffer serious burns from a
spray of boiling hot coolant when
the cap is removed.
CAUTION
. Be careful not to spill engine
coolant when adding it. If coolant
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or
a fire. If engine coolant gets on
the exhaust pipe, be sure to wipe
it off.
. Do not splash the engine coolant
over painted parts. The alcohol
contained in the engine coolant
may damage the paint surface.
! Checking the coolant level
S11AF0201
Engine coolant reservoir
1) FULL level mark
2) LOW level mark
A) COOLANT
B) SEE OWNERS MANUAL
Maintenance and service
11-21
CONTINUED
11

Table of Contents

Other manuals for Subaru FORESTER 2012

Related product manuals