Black plate (338,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
9-14 In case of emergency
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
Front tie-down hooks:
The front tie-down hooks are located
between each of the front tires and the
front bumper.
Rear tie-down hooks:
The rear tie-down hooks are located near
each of the jack-up reinforcements.
WARNING
Use the rear tie-down hooks only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip off
the hooks, possibly causing a dan-
gerous situation.
& Using a flat-bed truck
S09AF02
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever int o the “P”
position for AT models or the shift lever
into “1st” for MT models.
2. Pull up the parking brake lever firmly.
3. Secure the vehicle onto the carrier
properly with safety chains. Each of safety
chain should be equally tightened and
care must be taken not to pull the chains
so tightly that the suspension bottoms out.
To Next Page
Loading...
