Black plate (337,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
4. Tighten t he towing hook securely
using the wheel nut wrench.
After towing, remove the towing hook from
the vehicle and stow it in the tool bucket.
Fit the towing hook cover on the bumper.
Rear towing hook:
1. Take the towing hook out of the tool
bucket and take the screwdriver out of the
tool bag. Take the wheel nut wrench out of
the cargo area.
2. Pry off the cover on the rear bumper
using a flat-head screwdriver and you will
find a threaded hole for attaching the
towing hook.
3. Screw the towing hook into the thread
hole until its thread can no longer be seen.
4. Tighten the towing hook securely
using the wheel nut wrench.
After towing, remove the towing hook from
In case of emergency 9-13
– CONTINUED –
9
To Next Page
Loading...
