Subaru FORESTER 2012 - Recommended Grade and Viscosity; Rear Differential Gear Oil (AWD Models)

Black plate (382,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
11-32 Maintenance and service
1) Full level
2) Low level
3. Pull out the level gauge again and
check the oil level on it. If it is below the
low level, add oil to bring the level up to
the full level.
CAUTION
Be careful not to spill front differ-
ential gear oil when adding it. If oil
touches the exhaust pipe, it may
cause a bad smell, smoke, and/or a
fire. If oil gets on the exhaust pipe,
be sure to wipe it off.
& Recommended grade and
viscosity
S11AL02
Each oil manufacturer has its own base
oils and additives. Never use different
brands together. For details, refer to
“
s12aa13Manual transmission, front differential
and rear differential gear oil” F12-10.
Rear differential gear oil
(AWD models)
S11AM
There is no rear differential gear oil level
gauge. To check the rear differential gear
oil level, we recommend that you consult
your SUBARU dealer for inspection.
& Recommended grade and
viscosity
S11AM02
Each oil manufacturer has its own base
oils and additives. Never use different
brands t ogether. For details, refer to
“
s12aa13Manual transmission, front differential
and rear differential gear oil” F12-10.