Black plate (254,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
6-16 Interior equipment
& To install the cover
S06AK05
Insert the projections located on both ends
of the cover housing into the recesses of
the retainers.
WARNING
Make sure to install the cover hous-
ing securely. Otherwise, there is a
risk of being injured.
Cargo tie-down hooks
S06AM
The cargo area is equipped with four tie-
down hooks so that cargo can be secured
with a cargo net or ropes.
When using the tie-down hooks, turn them
down out of the storing recesses. When
not in use, put the hooks up into the
storing recesses.
CAUTION
The cargo tie-down hooks are de-
signed only for securing light cargo.
Never try to secure cargo that
exceeds the capacity of the hooks.
The maximum load capacity is 20 kg
(44 lbs) per a hook.
Rear view camera (if
equipped)
S06AW
A rear view camera is attached to the rear
gate. When the ignition switch is “ON” and
the shift lever (MT models) or select lever
(AT models) is set to “R”, the rear view
camera automatically displays the rear
view image behind the vehicle on the
navigation monitor or the display of the
type E audio (if equipped).
WARNING
. Since the rear view camera uses
a wide-angle lens, the image on
the monitor is different from the
actual view in terms of distance.
. Since the range of the image on
To Next Page
Loading...
