Black plate (435,1)
一般Model "A8170GE-A" EDITED: 2011/ 7/ 3
Wattage Bulb No.*
1) High beam headlight 12V-60W HB3
2) Front position light
12V-5W
W5W
3) Low beam headlight
Models with HID light 12V-35W D2R
Models with halogen light 12V-55W H7
4) Map light 12V-8W –
5) Dome light 12V-8W –
6) Front fog light 12V-51W HB4
7) Front turn signal light 12V-21W WY21W
8) Side turn signal light (if equipped) 12V-5W –
9) Door step light
12V-5W –
10) Cargo area light 12V-13W –
11) Brake/tail light
12V-21/5W W21/5W
12) Rear turn signal light 12V-21W WY21W
13) Back-up/rear fog light 12V-21W W21W
14) Licence plate light 12V-5W W5W
A)
High mount stop light ––
B)
Side turn signal light (if equipped) –
–
*: ECE specification
WARNING
. Bulbs may become very hot while
illuminated. Before replacing
bulbs, turn off the lights and wait
until the bulbs cool down. Other-
wise, there is a risk of burn injury.
. For models with HID low beam
headlights, observe the following
precautions. Not doing so carries
the risk of an electric shock that
could result in serious injury
because the HID bulbs use an
extremely high voltage.
– Do not replace any headlight
bulbs (both low beam and
high beam) by yourself.
– Do not remove/restore the
headlight assemblies by your-
self.
– Do not remove any headlight-
assembly components by
yourself.
For replacement, we recommend
that you contact your SUBARU
dealer.
Specifications 12-19
– CONTINUED –
12
To Next Page
Loading...
