ENGINE REMOVAL AND INSTALLATION 5-5
• Remove the drive chain clip
M and release the drive chain.
• Remove the snap ring
N and engine sprocket
O.
# 09900-06107: Snap ring pliers
• Remove the engine mounting upper brackets
P, left and
right.
• Remove the engine mounting front brackets
Q, left and right.
• Remove the engine mounting bolt and nut
R.
• Remove the swingarm pivot shaft nut and washer.
• Extract three quarters of the swingarm pivot shaft so as to
keep the swingarm in position.
NOTE:
The swingarm will come off when the swingarm pivot shaft is
completely removed.
• Remove the engine from the frame.
To Next Page
Loading...
