5. Communication Using Bluetooth® Technology
Warning Bluetooth® wireless technology is only available if the I-
™ is equipped with a radio that supports the Bluetooth® specification.
When the technology is activated, this feature is enabled, and the I-
™ enters the User Attended Mode. s
Warning To ensure the unit does not enter Unattended Surveillance Mode,
switch to ID Mode. s
5.2 Security Warning
Communication through the Bluetooth® wireless technology is by default
secure. However, wireless data transmission is not encrypted, so certain “snif-
fers” might be able to intercept the communication. Thus, all profiles pro-
vided by the I™ are authenticated only after using the 4-to-16
digit pin for pairing. The factory default pins for all Bluetooth® services is
“0000”
This value can be changed using the PC application. See chapter 4.12.4,
p. 81 for details.
5.3 Drivers for Bluetooth® Wireless Technology
Several Bluetooth® drivers (henceforth denoted “stacks”) are available, but
each differ in the supported profiles.
The recommended stack for Personal Area Networking is the Microsoft stack.
This stack supports all available Bluetooth® profiles, but by default Microsoft
does not allow access to all profiles.
For Bluetooth® File Transfer Service we recommend IVT Corporation
BlueSoleil. This software package is based on the Microsoft stack, but en-
94 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
