3. Operating the INTERCEPTOR™
Pressing the ACTION button flips the display 180 degrees to facilitate reading
the display while the device is holstered.
Figure 3-15. Modes of Operation - Level Mode (Flipped)
While no neutron information is displayed in Level mode, neutrons are still
being counted and if the preset threshold is reached, an alarm message will be
generated.
Figure 3-16. Modes of Operation - Level Mode (Neutron Warning)
3.3.2 Timer/Counter Mode
Timer/Counter (T/C) mode can be used to display additional information
about the accumulated values while the I™ is in use. All val-
ues are given with their associated, statistical error. Rate values are calculated
34 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
