4. PC Software
Figure 4-13. PC Software - Configuration Warning
Figure 4-14. PC Software - Configuration Save Dialog
In this instance, select the desired action for the specified unit. If this action
is desired for all units within a group or groups, select “yes to all”. It is impor-
tant when updating groups of units at once that each unit has been properly
added to the I™ Sync database. If this is not so, then the follow-
ing message box will appear.
Figure 4-15. PC Software - Synchronization Warning
76 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
