2.7. Storage
instrument to operate at peak performance, and to ensure that all pertinent
software and hardware modifications are made.
The I™ does not require calibration beyond the annual factory
optimization.
The device should be kept dry, clean, and should be charged regularly for
optimum performance. Fully discharge and recharge the battery once per
month to optimize the battery capacity.
2.7 Storage
The device should be stored in a dry, clean place, and preferably under
climate-controlled conditions. This is especially true for long-term storage,
in which case it is recommended the storage temperature be maintained at
room temperature (25°C).
The device battery should be discharged to 50% of its capacity during long-
term storage in order to maximize battery life. When the device is ready to be
returned to service, make sure that the unit is fully recharged.
It is recommended that the unit should be stored in its original case including
all of its accessories.
Thermo Fisher Scientific Interceptor™/en/5.1(4956)/Feb2010 19
To Next Page
Loading...
