5.4. Headset Equipped with Bluetooth® Wireless Technology
ables and provides easy interfaces for profiles disabled by Microsoft operating
systems. It also provides a very good Personal Area Network interface.
If the user needs to use a different stack, i.e. on a PocketPC or a SmartPhone,
supported profiles may vary and interfaces might be different.
The following chapters will explain the usage of the Microsoft stack and the
BlueSoleil software for connection establishing and required usage.
5.4 Headset Equipped with Bluetooth® Wireless
Technology
A headset equipped with Bluetooth® wireless technology can be paired with
the I™. The exact procedure is described in chapter 3.3.7, p. 41.
When a headset is paired with the I™ unit and the headset is
activated, all alarm conditions will be sent to the headset. Any voice input
(see chapter 3.2.3, p. 30) will come only from the headset.
The internal speaker is independent from the headset and can be disabled or
enabled using the Settings mode (see chapter 3.2.4, p. 30) or using the PC
Software. See chapter 4.12.1, p. 77 and 4.12.2, p. 78 for details.
5.5 Microsoft® Drivers for Bluetooth® Technology
Please refer to the Microsoft® documentation for detailed usage. Features
required here are only briefly explained.
5.6 IVT Corporation BlueSoleil
Please see the IVT Corporation BlueSoleil documentation for detailed usage.
Features required here are only briefly explained.
Thermo Fisher Scientific Interceptor™/en/5.1(4956)/Feb2010 95
To Next Page
Loading...
