Chapter 6
TROUBLESHOOTING
6.1 Troubleshooting - Usage and Maintenance
THE INTERCEPTOR™ DOES NOT POWER UP.
The device’s battery may be discharged. Try charging the battery.
THE INTERCEPTOR™ DEACTIVATES IMMEDIATELY AFTER STARTING UP, OR
AFTER RECOVERING FROM POWER SAFE / SURVEILLANCE MODE.
Fully charge the I™ battery, and then try again.
FIRMWARE UPDATE FAILS, AND INSTRUMENT DOES NOT DO ANYTHING.
Return to the factory.
THE RUN-TIME IS DOWN TO 16 HOURS IN USM AT 25 °C, EVEN AFTER
RECHARGING THE BATTERY MULTIPLE TIMES AT 25 °C.
The battery requires replacement. Return to the factory.
Thermo Fisher Scientific Interceptor™/en/5.1(4956)/Feb2010 107
To Next Page
Loading...
