3. Operating the INTERCEPTOR™
Figure 3-40. Modes of Operation - Bluetooth® GPS Mode (No Satellites)
Figure 3-41. Modes of Operation - Bluetooth® GPS Mode (No GPS Module)
Warning Invalid coordinates can occur when the Bluetooth® connection to
the GPS receiver is functional but the GPS receiver is not receiving data from
the satellites. s
This can be caused by an improperly set up Bluetooth® connection, mal-
function of the GPS receiver, or operating in an area with degraded or no
reception from the satellites. Typically, when an identification event report
contains coordinates that are labeled invalid, they are the last coordinates re-
ceived before the satellite signal was lost.
48 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
