EasyManua.ls Logo

Thermo Interceptor - SPRD Mode (Optional); Modes of Operation - SPRD Mode (Dose Rate)

Thermo Interceptor
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3.3. Additional Modes of Operation
Figure 3-25. Modes of Operation - Advanced Spectrum Mode (Loading)
Figure 3-26. Modes of Operation - Advanced Spectrum Mode (Storing)
3.3.5 SPRD Mode (Optional)
Warning This mode is optional depending upon the configuration of the
I s
The I can be used as an automatic search and identification
device. The SPRD finder continuously monitors the ambient gamma dose
rate. When the dose rate exceeds 30µRem/Hr, the device will automatically
switch to ID mode and begin the acquisition and identification process.
Figure 3-27. Modes of Operation - SPRD Mode (Dose Rate)
Thermo Fisher Scientific Interceptor™/en/5.1(4956)/Feb2010 39

Table of Contents

Related product manuals