4. PC Software
4.7 PC Software Remarks
The PC software is designed to be an off-line database. This allows the user
to register multiple I™ devices. The recorded data - spectra,
images and voice messages - from the I™ can be downloaded.
I™ Sync software organizes this into a historical chart and list,
allowing the user to track various units over time.
All data is made available on the PC for further analysis, and can be analyzed
using ICx Technologies’ winTMCA32®. The data is stored in the “store”
root directory using the storage folder corresponding to the device serial num-
ber. You can define the location of the store root directory in the preferences
menu if you do not wish it to be in the default location.
Warning All stored data is removed from the device when synchronizing
the device with the I™ Sync software. s
The I™ Sync software allows you to change the behavior and
measurement configuration of the I™. Configuration changes
can be made even when the device is not connected which permits admin-
istrators to configure multiple devices without requiring the devices to be
physically present. The new configuration data will then be uploaded to the
I™ the next time it is connected and synchronized.
The I™ Sync software is secured by both username and pass-
word. The default username and password is:
“admin”
The username and the password can be changed in using the “edit | user and
password menu” item in the I™ Sync software application.
62 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
