Thermo Interceptor - Bluetooth PAN - Connection to the PC; Bluetooth Personal Area Network (PAN) - IP Addresses

5. Communication Using Bluetooth® Technology
5.7 Bluetooth® PAN - Connection to the PC
At the time of this manual, only communication with the PC software is sup-
ported.
The following instructions will provide all information required to establish a
Bluetooth® connection.
Warning A connection between your PC and your I™ has to
be established before any communication with the PC software is possible.
s
Warning When the I™ unit is in User Surveillance Mode
(USM), a Bluetooth® connection to the PC cannot be established. Make
sure the unit is in User Attended Mode (UAM) before attempting Blue-
tooth® pairing and connection. s
Warning Communication with multiple I™ units is possible
only when the IP addresses of these units differ. s
Warning Before connecting via Bluetooth®, make sure that the USB con-
nection is disconnected for at least 15 seconds. s
Warning Before connecting via USB, make sure that the Bluetooth® con-
nection is disconnected for at least 15 seconds. s
5.7.1 Bluetooth® Personal Area Network (PAN) - IP Addresses
The PAN communication of your I™ unit is based on statically
assigned IP addresses. The user can set the device IP address using the PC
96 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies