4. PC Software
these packages is not required: the installation assistant will verify any soft-
ware installation and prompt the user to install or update any relevant soft-
ware as necessary. Before installing the PC software, make sure that Microsoft
.NET™ Version 2.0 Framework and Microsoft® ActiveSync® Version 4.1
is compatible with the rest of the other existing software on the selected PC.
If this is unclear, consult your system administrator, the Microsoft® home-
page, or our support staff. Potential conflicts can result from using other Mi-
crosoft® ActiveSync® enabled devices like smart-phones, Palm® devices,
or Hotsync®-enabled devices on the same PC. If any of these devices are in-
stalled or connected to the PC possessing the software installation, the user
cannot use or connect these devices during the PC software execution.
Warning Do not connect the I™ to the Sync application if the
PC is operating under any other condition. See Chapter 6, p. 107 for known
issues. s
4.4 Installing the PC Software
The I™ Sync software is provided on a CD-ROM which
automatically begins installation after inserting into and closure of the
CD-ROM drive. Should the autorun function be disabled, run the
“I™.exe” file located on the CD-ROM.
Follow the prompts of the installation assistant. Do not reboot the computer
during the software installation. Should the system request a reboot during
the process, skip this request and reboot when the installation is finished. If
the installation assistant detects that Microsoft® ActiveSync® is not installed
on the PC, installation of ActiveSync® will commence.
58 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
