3. Operating the INTERCEPTOR™
. . . continuation
Mode General Summary Section
Voice
Recorder
Create and store a voice recording. 3.2.3, p. 30
Settings Change Speaker, Vibrator and display
brightness settings
3.2.4, p. 30
(Camera) Capture and store a VGA photo. 3.3.3, p. 35
(Advanced
Spectrum)
Advanced spectrum measurement and
analysis functions.
3.3.4, p. 36
(SPRD) Automatic search and identification. 3.3.5, p. 39
Info Displays information about configura-
tions, memory usage, and software ver-
sions.
3.3.6, p. 40
(Bluetooth®) Enables communications with the headset,
PC or Mobile Device using Bluetooth®
wireless technology.
3.3.7, p. 41
(Reach Back) Transmit data to a back-end server for
further review and analysis.
3.5, p. 49
†The Finder Mode is a sub-mode of the Dose Rate Mode.
Warning If the measured count rate reaches 150kc/s, in any mode the de-
vice will immediately go into overload. Once the I™ has gone
into overload, the user must leave the high dose area and reboot the instru-
ment to recover. Overload is indicated by alternating the screens shown in
Figure 3-1, p. 23 and Figure 3-2, p. 23 s
22 Interceptor™/en/5.1(4956)/Feb2010 ICx Technologies
To Next Page
Loading...
