tornos DECO 7/10 - Page 166

OPTIONS & ALLIED TOOLING − DECO 7/10 − DECO 7a/10a − DECO 7e/10e
300236 en − 02/07 Chap. 21.2 /6
− Get positioned on line K01.
− Get positioned with cursor on bit 2 (000000000).
− Type 1 on keyboard
− Press key INPUT
Wiring of socket XS38
A
10
11
12
13
14
15
16
B
1
2
3
4
5
6
7
8
9
M
Unlock access to parameters:
− Select mode “MDI” on operator panel.
− Press key “OFFSET SETTING”
− Select page “SETTING/HANDY”
(Select channel 2 if the page does not get selected).
Move with arrows. − Set PARAMETER WRITE = 1.
Programming of engagement and disengagement of the pump
− Select mode “MDI” on operator panel.
−Press key “SYSTEM” on CNC
( PMC )
− Press softkey “PMC”.
(PMCPRM)
− Press softkey “PMCPRM”.
( TIMER )
− Press softkey “TIMER”.