Toshiba e-studio 6560c - LGC Board (LGC)

9
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REPLACEMENT OF PC BOARDS/HDD
9 - 5
9.1.6 LGC board (LGC)
(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Disconnect 28 connectors.
Notes:
When installing, be sure to connect the flat
cables at the proper positions.
Fig. 9-12
(3) Remove 8 screws and take off the LGC
board [1].
Fig. 9-13
Notes:
When replacing or installing the LGC board,
be sure to attach the film [2] for the SRAM
board <for the LGC board> (SRAM-L) [1].
*e-STUDIO5560C/6560C/6570C only
Fig. 9-14
4C
3Y
1K
2M
[
1
]
[
1
]
[
2
]