Toshiba e-studio 6560c - Bridge Unit Cooling Fan (Rear)

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 236
4.10.31 Bridge unit cooling fan (rear) (F7)
(1) Take off the upper fans (left) and (right).
 P. 4-23"4.3.9 Upper exhaust fan (left)
(F29)"
 P. 4-25"4.3.10 Upper exhaust fan (right)
(F30)"
(2) Remove 2 screws and then take off the
bracket.
Fig. 4-685
(3) Release the harness from the clamp and
then disconnect the connector.
Fig. 4-686
(4) Remove 1 screw and then take off the bridge
unit cooling fan (rear) by sliding it.
Fig. 4-687