e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 64
4.5.28 Registration sensor (S52)
(3) Disconnect 1 connector. Then take off the
registration guide.
Fig. 4-184
(1) Take off the registration guide.
P. 4-63"4.5.27 Registration guide"
(2) Remove 3 screws and the paper dust
receiving tray.
Fig. 4-185
(3) Disconnect 1 connector and remove 1 screw.
Then take off the registration sensor.
Fig. 4-186
Paper dust receiving tray