Toshiba e-studio 6560c - SRAM Board for LGC Board

9
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
REPLACEMENT OF PC BOARDS/HDD
9 - 15
9.1.13 SRAM board <for LGC board> (RAM-L)
(7) Release harness from 1 clamp.
(8) Remove 2 screws and take off the HDD
cooling fan and duct.
Fig. 9-43
(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Release 2 latches [1] and take off the SRAM
board for the LGC board with the case [2].
Fig. 9-44
(3) Release 2 latches and take off the SRAM
board for LGC board from the case.
Fig. 9-45
HDD cooling fan
Duct
[
1
]
[
1
]
[
2
]
Latch
SRAM board
<for LGC board>
Case