5
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
SELF-DIAGNOSTIC MODE
5 - 5
5.2 Service UI
5.2.1 Overview
The following self-diagnostic modes can be used with Service UI on the touch panel of the control
panel.
• 04 TEST PRINT MODE
• 05 ADJUSTMENT MODE
• 08 SETTING MODE
• 6S PM SUPPORT MODE
• 9S LIST PRINT MODE
• FAX LIST PRINT MODE
• CHART PRINT MODE
Notes:
Not all codes of the self-diagnostic mode can be used with Service UI. Refer to Chapter 15 for
the codes available with Service UI.
5.2.2 Login procedure
[ 1 ] In the normal mode
(1) Turn the power ON.
(2) Press the [USER FUNCTIONS] button.
(3) With the [USER FUNCTIONS] menu displayed, enter the Service Mode password provided
during product training.
Fig.5-2
To Next Page
Loading...
