4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 51
4.5.10 1st drawer idling roller
(5) Remove 2 screws and then take off the
bypass motor.
Fig. 4-144
(1) Take off the bypass feed unit.
P. 4-45"4.5.2 Bypass feed unit"
(2) Remove 1 screw and take off the 1st drawer
idling roller unit.
Fig. 4-145
(3) Remove 2 screws and take off the roller
assembly.
Fig. 4-146
1st drawer idling roller unit
To Next Page
Loading...
