Toshiba e-studio 6560c - Waste Toner Amount Detection Sensor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 123
4.6.38 Waste toner amount detection sensor (S13)
(1) Take off the left lower cover.
 P. 4-4"4.1.11 Left lower cover"
(2) Remove 1 screw and then take off the
bracket.
Fig. 4-361
(3) Hold up the bottom of the case and remove a
dowel. Then remove the case by lowering it.
Fig. 4-362
(4) Hold up the bottom of the waste toner case
and remove a dowel. Then remove the waste
toner case by lowering it.
Fig. 4-363
Bracket