Toshiba e-studio 6560c - Bridge Unit Cooling Fan (Front)

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 235
4.10.30 Bridge unit cooling fan (front) (F6)
(1) Take off the top front cover.
 P. 4-2"4.1.5 Top front cover"
(2) Pull out the bridge unit.
(3) Remove 2 screws and then take off the inner
cover.
Fig. 4-682
(4) Remove 4 screws and then take off the fan
cover.
Fig. 4-683
(5) Release the harness from the clamp and
then disconnect the connector.
(6) Remove 2 screws and then take off the
bridge unit cooling fan (front).
Fig. 4-684