e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 32
[B] Installing carriage wires
(1) When replacing the carriage wires, refer
illustrations below:
Notes:
Adjustment of the carriage wire tension is not
necessary since a certain tension is applied
to the carriage wires by the tension
springs.Make sure the tension applied to the
wire is normal.
Fig. 4-88
Fig. 4-89
[Front]
Wire pulley
Bracket for carriage-1
Carriage wire
Carriage-2
Idler pulley
Hook
Tension spring
[Rear]
Carriage-2
Carriage wire
Bracket for carriage-1
Hook
Wire pulley
Tension spring
Idler pulley
To Next Page
Loading...
