Toshiba e-studio 6560c - Pulling out the Transfer Belt Unit

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 139
4.7 Transfer Unit
4.7.1 Pulling out the transfer belt unit
(1) Open the duplexing unit.
(2) Take off the front lower cover.
 P. 4-1"4.1.1 Front lower cover"
Fig. 4-406
(3) Turn the TBU locking lever for 90 degrees.
Fig. 4-407
(4) Lift up the EPU locking lever.
Fig. 4-408
Duplexing unit
TBU locking lever
EPU locking lever