Toshiba e-studio 6560c - Paper Feeder Unit

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 266
4.11.12 Paper feeder unit
(12) Separate the reverse guide and the exit/
reverse guide.
Fig. 4-775
(1) Open the original jam access cover. Then
remove 2 screws and take off the arm unit on
the front side.
Fig. 4-776
(2) Remove 1 clip and slide the bushing.
Fig. 4-777
Exit guide
Exit/reverse guide