Toshiba e-studio 6560c - Restrictions When Using the External Counter

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
EXTERNAL COUNTERS
13 - 6
13.3.6 Restrictions when using the external counter
The Job Skip function will be disabled when an external counter is installed (when a value other than
"0" is set for 08-9016).
Therefore, if printing is attempted while a counter or a coin controller is used, all jobs stored in the HDD
may be printed.