Toshiba e-studio 6560c - Solenoids

3
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
OUTLINE OF THE MACHINE
3 - 37
3.3.6 Solenoids
Symbol Name Function Remarks P-I
SOLR1 Original pickup solenoid Drives up and down the original pickup
roller.
Fig. 3-4 89-10
SOLR2 Original reverse solenoid Drives the reverse flapper. (Switches
the flapper to the reverse side when
turned to ON.)
Fig. 3-4 89-13
SOLR3 Original exit solenoid Drives the exit flapper. (Switches the
flapper to the original reverse tray side
when turned to ON.)
Fig. 3-4 89-13
SOL1 Transport path switching solenoid-1 Driving the switching operation of the
bridge unit transport paths
Fig. 3-6 24-28
SOL2 Transport path switching solenoid-2 Driving the switching operation of the
bridge unit transport paths
Fig. 3-6 24-28
SOL3 Image quality shutter solenoid Driving the sensor shutter of the image
position aligning sensor (front / center /
rear) and image quality sensor
Fig. 3-13 6-11
SOL4 V0 sensor shutter solenoid-K Driving the opening/closing operation
of the shutter of the drum surface
potential (V0) sensor-K
(e-STUDIO6550C/6570C only)
Fig. 3-11 59-33
SOL8 Bypass pickup solenoid Driving the lifting movement of the
bypass pickup roller
Fig. 3-18 15-5
SOL9 Tandem LCF solenoid Driving the lifting movement of the
tandem LCF pickup roller
Fig. 3-21 11-62
SOL10 Stopper opening/closing solenoid
(front)
Driving the opening/closing operation
of the front stopper in the tandem LCF
Fig. 3-21 14-28
SOL11 Stopper opening/closing solenoid
(rear)
Driving the opening/closing operation
of the rear stopper in the tandem LCF
Fig. 3-21 14-28