Toshiba e-studio 6560c - Bypass Pickup Solenoid; Bypass Paper Sensor

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 46
4.5.3 Bypass pickup solenoid (SOL8)
4.5.4 Bypass paper sensor (S71)
(4) Disconnect 4 connectors and remove 2
screws. Then take off the bypass feed unit.
Fig. 4-129
(1) Take off the bypass feed unit.
 P. 4-45"4.5.2 Bypass feed unit"
(2) Remove a spring and 2 screws. Then take
off the bypass pickup solenoid together with
its link arm.
Fig. 4-130
(1) Take off the bypass pickup solenoid.
 P. 4-46"4.5.3 Bypass pickup solenoid
(SOL8)"
(2) Take off the actuator.
Fig. 4-131
Bypass feed unit
Bypass pickup solenoid
Spring
Actuator