e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 166
4.8.4 Image position aligning sensor (rear) (S22)
4.8.5 Image quality sensor (S23)
(1) Take off the image quality control unit
P. 4-165"4.8.1 Image quality control unit"
(2) Remove 2 screws and take off the image
position aligning sensor (rear).
Fig. 4-486
(1) Take off the image quality control unit
P. 4-165"4.8.1 Image quality control unit"
(2) Turn up a film [1] and then remove 2 screws.
Fig. 4-487
(3) Disconnect 1 connector, and take off the
image quality sensor
Fig. 4-488
Image position aligning sensor (rear)
Connector
Image quality sensor