Toshiba e-studio 6560c - Exit;Reverse Roller

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 276
4.11.21 Exit/reverse roller
(1) Take off the exit/reverse guide.
 P. 4-264"4.11.11 Exit guide / Exit/reverse
guide / Reading end guide"
(2) Remove 2 screws and take off the guide.
Fig. 4-805
(3) Remove 1 E-ring, 1 pulley, 1 pin and 1
bushing.
Fig. 4-806
(4) Take off the exit/reverse roller, remove 1 E-
ring and 1 bushing.
Fig. 4-807
Bushing
Pulley
Pin
E-ring
Bushing
E-ring