4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 243
4.10.41 ADU motor-1 (M7)
(4) Release the harness from 2 clamps.
(5) Remove 2 screws and then take off the
Reversed paper cooling fan.
Fig. 4-706
(1) Take off the duplexing unit rear cover.
P. 4-242"4.10.39 Duplexing unit rear side
cover"
(2) Disconnect a connector from the ADU motor-
1.
(3) Remove 2 screws and then take off the ADU
motor-1 together with its bracket.
Notes:
When installing the motor, set the belt
securely to the gear and the pulley.
Fig. 4-707
(4) Remove 2 screws and then take off the
bracket from ADU motor-1.
Fig. 4-708
Reversed paper cooling fan
To Next Page
Loading...
