Toshiba e-studio 6560c - Reverse Sensor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 231
4.10.27 Reverse sensor (S59)
(5) Take off the bridge unit path exit sensor from
the sensor bracket.
Fig. 4-670
(1) Open the front cover and then pull out the
bridge unit.
(2) Remove 3 screws and then remove the
sensor stay.
Fig. 4-671
(3) Remove 1 screw and disconnect 1
connector. Then take off the reverse sensor.
Fig. 4-672
Bridge unit path exit sensor
Sensor stay
Reverse sensor