Toshiba e-studio 6560c - SRAM Board for SYS Board

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 16
9.1.14 SRAM board <for SYS board> (RAM-S)
Notes:
• The shape of the SRAM board for the
LGC board differs from the one for the
SYS board.Be sure to assemble the
correct SRAM board.
• Be sure to attach the film [2] for the
SRAM board <for the LGC board>
(SRAM-L) [1] when it is installed in the
LGC board.
*e-STUDIO5560C/6560C/6570C only
Fig. 9-46
Fig. 9-47
(1) Take off the SYS board cover.
 P. 9-1"9.1.1 SYS board cover"
(2) Release 2 latches [1] and take off the SRAM
board for the SYS board with the case [2].
Fig. 9-48
SRAM board
<for LGC board>
SRAM board
<for SYS board>
[
1
]
[
2
]
[
1
]
[
1
]
[
2
]