Toshiba e-studio 6560c - Transport Motor-2; Feed Motor; Feed;Transport Motor

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 71
4.5.38 Transport motor-2 (M41)
4.5.39 Feed motor (M42)
4.5.40 Feed/transport motor (M43)
(1) Take off a plate.
 P. 4-70"4.5.37 Transport motor-1 (M40)"
(2) Remove 2 screws and then take off the
transport motor-2.
Fig. 4-206
(1) Take off a plate.
 P. 4-70"4.5.37 Transport motor-1 (M40)"
(2) Remove 2 screws and then take off the feed
motor.
Fig. 4-207
(1) Open the PFC board case.
 P. 9-8"9.1.9 PFC board case"
(2) Remove 4 screws and take off the feed/
transport motor [1].
Fig. 4-208
Transport motor-2
Feed motor
[
1
]