e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 228
4.10.24 Transport path switching solenoid-2 (SOL2)
(3) Release the harness from the clamp and
then disconnect the connector.
(4) Remove 1 screw and 1 link.
Fig. 4-661
(5) Take off the transport path switching
solenoid-1 by removing 2 screws.
Fig. 4-662
(1) Take off the bridge unit front cover.
P. 4-214"4.10.12 Bridge unit front cover"
(2) Release the harness from the clamp and
then disconnect the connector.
(3) Remove 1 screw and 1 link.
Fig. 4-663
Front side
Transport path
switching solenoid-1
To Next Page
Loading...
