Toshiba e-studio 6560c - 1 St Transfer Roller; Cleanable Facing Roller

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 149
4.7.10 1st transfer roller (Y/M/C/K)
4.7.11 Cleanable facing roller
(1) Take off the transfer belt.
 P. 4-146"4.7.7 Transfer belt"
(2) Remove 2 screws each and take off a holder.
Fig. 4-435
(3) Take off the 1st transfer roller [1] (Y/M/C/K).
Fig. 4-436
(1) Take off the transfer belt.
 P. 4-146"4.7.7 Transfer belt"
(2) Remove 3 screws, 1 E-ring, and the 2nd
transfer motor holder [1].
Fig. 4-437
Holder
[
1
]
[
1
]