Toshiba e-studio 6560c - PFC Board Case

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
9 - 8
9.1.9 PFC board case
(3) Remove 6 screws and take off the PFC
board [1].
Fig. 9-21
(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Disconnect 16 connectors. (in case of a 4-
drawer model)
Fig. 9-22
Notes:
If the equipment is a tandem LCF-model,
disconnect 15 connectors.
Fig. 9-23
[
1
]