Toshiba e-studio 6560c - Developer Unit Motor-K;YMC; Developer Unit Mixer Motor-K;YMC; Developer Drive Unit

4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 121
4.6.34 Developer unit motor-K/YMC (M29)/(M31)
4.6.35 Developer unit mixer motor-K/YMC (M30)/(M32)
4.6.36 Developer drive unit
(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Disconnect 1 connector and remove 2
screws for each motor. Then take off the
developer unit motor [1].
Fig. 4-355
(1) Take off the rear cover.
 P. 4-7"4.1.18 Rear cover"
(2) Disconnect 1 connector and remove 2
screws for each motor. Then take off the
developer unit mixer motor [1].
Fig. 4-356
(1) Take off the drum drive unit.
 P. 4-117"4.6.29 Drum drive unit"
(2) Disconnect 4 connectors and remove 3
screws. Then take off the developer drive
unit.
Fig. 4-357
[
1
]
[
1
]
[
1
]
[
1
]
Developer drive unit