4
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
DISASSEMBLY and REPLACEMENT
4 - 305
4.12.2 MJ-1103/1104 (Finisher)
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the interface cable of the finisher.
Fig. 4-7
(3) Open the cover.
Fig. 4-8
(4) Pull the lever to release the lock.
(5) Separate the finisher from the equipment
while pulling the lever.
Fig. 4-9
To Next Page
Loading...
