Toshiba e-studio 6560c - Bypass Separation Roller

e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY and REPLACEMENT
4 - 52
4.5.11 Bypass separation roller
(4) Remove the 2 E-rings and take off the idling
roller.
Fig. 4-147
Notes:
1. When assembling the unit, pay attention
to the orientation of the bracket.
2. After the unit was assembled, perform
position adjustment of the media sensor.
Fig. 4-148
(1) Take off the bypass feed unit.
 P. 4-45"4.5.2 Bypass feed unit"
(2) Remove 1 screw and take off the bracket.
Fig. 4-149
Blacket